Friction Guard XP Gun Oil

Name: Friction Guard XP Gun Oil
Brand: Bore Tech
SKU: BTCO-14004
Availability: OutOfStock

$18.49

Bore Tech Friction Guard XP Gun Oil is a synthetic blend of oils, penetrants and friction reducing additives with enhanced rust and corrosion inhibitors.

Out of stock

(E-mail when Stock is available)

Description

Bore Tech Friction Guard XP Gun Oil is a highly advanced synthetic blend of oils, penetrants and friction reducing additives combined with enhanced rust and corrosion inhibitors. Friction Guard XP offers unsurpassed lubrication, unequaled performance and complete metal conditioning under the most extreme conditions.

Bore Tech Friction Guard XP Gun Oil is a specially formulated synthetic blend of oils with cutting edge additives that provide high performance lubrication and enhanced rust and corrosion properties that exceed MIL-PRF-63460E requirements.

FRICTION GUARD XP GUN OIL

-100˚F to 600˚F Operating Range	Superior Corrosion Protection
Decreases Friction & Wear By 95%	Conditions Bore

Friction Guard XP’s technologically advanced formulation incorporates proprietary additives that penetrate deep into the metal’s pores and bond to the metal’s surface creating an enhanced film strength layer that provides superior anti-wear properties over a wide range of operating temperatures. Friction Guard XP will not burn off under extreme temperatures found during full auto fire or become sticky and gummy in the extreme cold with a -100˚F to 600˚F operating range.

The Friction Guard XP also offers unparalleled protection against rust and corrosion by forming an effective barrier film on the surface. This micro thin film has surpassed 100 hours in the ASTM B-117 salt spray test and proven to effectively displace moisture and neutralize corrosive residues.
A light coat of Friction Guard XP during storage continues to condition the metal surface. It will not attract dust or debris and helps repel fouling during shooting.

Bore Tech’s Friction Guard XP is the enhanced oil of choice for the extreme shooter, hunter or enthusiast looking for nothing but the best.

Bore Tech – Redefining Gun Care
Proudly made in the USA

More Information

Instructions

Bore Tech Friction Guard XP Gun Oil Use Instructions

UNLOAD FIREARM

Clean areas to be treated with Bore Tech Blast Degreaser and let dry.
Next, apply Friction Guard XP to all moving parts. Cycle the parts several times to distribute oil evenly.
If applying to bore, wet a Bore Tech patch/mop and pass through bore until a light coat of oil is present.
Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.

FAQs

Q: When do I use the Friction Guard XP Gun Oil instead of Shield XP Rust Preventative?

A: Friction Guard XP is recommended for use internally (rifle bores) to protect against rust and corrosion or as a lubricant on moving parts. The Shield XP is recommended for use on the exterior of firearms to protect against rust and corrosion and is not a lubricant. Please see our convenient and easy to use Lubricant/Preventative Selection Guide in the Specifications Tab or in the Knowledge Center.

Q: Can I use Friction Guard XP inside my bore?

A: Yes, the Friction Guard XP can be used inside your bore to protect against rust and corrosion for extended periods.